50kV VLF Hipot Tester With Handcart

A:The integrated handcart solves the major challenge of transporting heavy test equipmentin the field. Benefits include:

Portability:Easily moved by one person across substations, industrial plants, or rough terrain.

Rapid Deployment:Reduces setup and teardown time from hours to minutes.

All-in-One Station:Stores the tester, cables, and accessories securely in one unit.

Safety:Improves safety by minimizing manual lifting and carrying of heavy components.

A: It is designed for testing equipment rated up to 35kV class and beyond, including:

Underground Power Cables(XLPE, EPR, PILC)

Generators and Large Motors

Switchgear and Busbars

Transformers and Bushings

A:

The test object MUST be completely de-energized, isolated, and groundedbefore making any connections.

Establish a clearly marked safety perimeterwith barriers and warning signs.

Always use proper PPE:insulated gloves, safety goggles, and flame-resistant clothing.

Verify the test object is dischargedafter the test and before disconnecting.

Q: Can this tester locate the exact spot where a cable fails?
A: No.A VLF Hipot tester is for testing and diagnosing insulation quality. If the cable fails (breaks down) during the test, it tells you the insulation is faulty. To find the exact physical location of the fault, you need a separate instrument called a Cable Fault Locator.

Q: What kind of training is required to operate it?

A:Operators must be:

Qualified electrical technicianstrained in high-voltage safety procedures.

Trained on the specific functions and controls of this tester.

Knowledgeable in interpreting results (especially Tan Delta data) and relevant standards (e.g., IEEE 400.2)