Insulator Pollution Degree Detector

Insulator Pollution Degree Detector

The HPJY-32 Insulator Pollution Degree Detector  is designed to detect the contamination adherence of insulators in power lines. This instrument can measure both the salt density and ash density of insulators in a single operation, simplifying the contamination detection process, making it highly suitable for use in inspection sites and laboratories.
Send Inquiry
Description
Technical Parameters

 

Product Overview 

 

 

HM320005

The HPJY-32 Insulator Pollution Degree Detector  is designed to detect the contamination adherence of insulators in power lines. This instrument can measure both the salt density and ash density of insulators in a single operation, simplifying the contamination detection process, making it highly suitable for use in inspection sites and laboratories.

 

 

 

product parameters

 

 

Project Scope
Ash Density Test Range

0-9.9999mg/cm2

Salt Density Test Range

0-9.9999mg/cm2

Ash Density Error Range

±3%

Salt Density Error Range

±1%

Display 7-inch high-definition touchscreen
Power Supply 12.6V 6000mAh lithium battery
Operating Temperature

0-40℃

Relative Humidity

≤85%

Dimensions

407*342*193mm

Instrument Weight

4.6Kg

 

 

 

 

HM320003

 

panel Descriptionj

 

HPJY-32

 

The detector comprises the components shown in Figure 1, with each section performing the following functions:

  • Display: This touchscreen display not only presents measurement results and other data but also enables parameter input, operation of tests, and viewing of historical records via touchscreen interaction.
  • Printer: Prints test results on receipt paper; users must replace the printer paper themselves.
  • Testing Port: Solution samples are poured through this port into the internal testing vessel for measurement.
  • Drainage port: Used to discharge the tested solution after measurement. The instrument's dedicated drainage tube must be inserted prior to draining.
  • Charging port: Used to charge the instrument via the accompanying charger.
  • Drainage button: Controls the instrument's drainage function. Press this button after testing to discharge the solution added to the testing port through the drainage port.
  • Power button: Controls the instrument's main power supply. Press to switch the instrument on.
  • USB port: Allows insertion of the instrument's dedicated USB drive for data export or software updates.

Hot Tags: insulator pollution degree detector, China insulator pollution degree detector manufacturers, factory