SF6 GIS PD Fault Simulation Test

SF6 GIS PD Fault Simulation Test

After years of dedicated research, Goldhome Hipot has successfully developed a gas-insulated SF6 power GIS fault simulation device. Leveraging the superior insulation and arc - quenching properties of SF6 gas, this device integrates a high - voltage partial - discharge - free system to accurately simulate....
Send Inquiry
Description
Technical Parameters

Product Overview

 

Overview:
Due to SF6 gas's excellent insulation properties, arc-quenching capabilities, and non-flammability, it has gained widespread application as a new insulating medium. After years of dedicated research, Goldhome Hipot has successfully developed a gas-insulated SF6 power GIS fault simulation device. Leveraging the superior insulation and arc - quenching properties of SF6 gas, this device integrates a high - voltage partial - discharge - free system to accurately simulate multiple fault types, including corona discharge, floating discharge, void discharge, particle discharge, and surface discharge. It supports composite discharge mode generation, making it a core tool for power research, education, and instrument calibration

 

product Features

 

GIS01

1. Compact design for minimal space requirements
2. Lightweight components
3. Rugged construction withstanding long-distance transportation
4. Capable of performing various tests in unshielded environments
5. All high-voltage sections enclosed in sealed compartments for operator safety
6. Wide application range; can conduct withstand voltage tests on conventional equipment with additional bushings.
7. Integrated high-voltage measurement and partial discharge coupling capacitor.
8. System-wide partial discharge level below 1 pC, guaranteeing test data accuracy. 

 

 

Products Parameter

 

Parameter

Technical Specifications

Rated Voltage

0–100kV (adjustable)

Partial Discharge Level

≤1pC

Discharge Simulation Range

Corona: 5–800pC; Particle: 0.1–10pC; Floating: 100–20,000pC; Void / Surface: 10–1,000pC

Coupling Capacitance

100pF / 50pF (subject to actual configuration)

Power Supply

220V AC / DC ±10%, 22.7A

SF6 Gas Pressure

0.4MPa (factory default); Annual leakage ≤1%

Protection Class

IP32

Operating Temperature

10°C–50°C (indoor / outdoor)

 

Product Introduction

 

gis

 

 

Control Panel Layout Diagram

 

1-Power Socket 2-Digital Time Relay
3-Electronic Current Adjuster 4-Start, Stop, Timing Buttons
5-High-Voltage Indicator Gauge 6-Low-Voltage Current Indicator
7-Signal Lamp, Alarm Flashing Light 8-Terminal B Block

 

Optimized for Google SEO with keywords: GIS PD Simulator, Partial Discharge Testing, SF6 Gas Insulation, High - Voltage Calibration, Power Equipment Research.

 

Hot Tags: SF6 GIS PD Fault Simulation Test, China SF6 GIS PD Fault Simulation Test manufacturers, factory