Cable Fault Detector

Cable Fault Detector

HM-A50 trolley cable fault tester is a trolley cable fault test system that our company has been committed to in the field of power cable fault testing for a long time. In order to cater to the rapid development....
Send Inquiry
Description
Technical Parameters

Products video

 

HM A50 Trolley Cable Fault Locator Display Video

                                                                               

 

Product Overview & Application Scenarios

3

HM-A50 trolley cable fault tester is a trolley cable fault test system that our company has been committed to in the field of power cable fault testing for a long time. In order to cater to the rapid development of the power industry, combined with various experiences and intensive research, it highly integrates traditional, independent cable fault distance measurement, integrated high-frequency high-voltage power supply, multiple pulse generator, automatic discharge and other independent units into one.

 

Key Features & Advantages

 

  • The system adopts embedded highly integrated integration design, strong anti-interference, easy and flexible to move.
  • It is suitable for testing all kinds of main insulation faults of power cables of different voltage levels.
  • The fault test unit adopts an embedded host and Linux operating system.
  • The high-frequency and high-voltage power supply unit touch screen control system embodies human-computer interaction, convenient operation, simple and intuitive display.
  • The system is equipped with a 25m test line, which is convenient for cable fault testing at long and short distances and in complex environments.
  • The whole machine is designed according to European standards and has an authority key for professionals
  • The whole machine has a ground loop monitoring protection system to protect equipment and personal safety in real time.

 

Parameters  Description

1

◆ External dimension: 530(L)*430(W)*960(H)mm

◆ Weight:≤ 90Kg

◆ Input power: AC220V±10%, 50Hz

◆ Charging adapter: DC16.8V

◆Display: 12.1-inch industrial-grade LCD (Linux operating system).

◆Storage space: 32G electronic disk.

◆Language: Chinese, English and Russian language switching

◆Test methods: low-pressure pulse method, high-pressure flash method, multiple pulse method.

◆Operation mode: touch screen plus photoelectric knob dual operation (touch screen function optional)

◆Pulse width/pulse amplitude (100ns~10μs, 120V)

◆Gain adjustment (-20...+40dB)

◆Output Impedance Matching (120 Ohms)

◆Flash tester with WIFI module and SIM interface can realize the remote transmission of test data

◆Testing distance: 5m-100km.

◆Minimum test distance (blind spot): 5 meters.

◆Precise pointing error: ±0.2m.

◆Testing Error: System error is less than ±1%.

◆Multiple pulse generator: Impulse voltage ≤ 40kV.

◆Resolution: v/(2f) meters. (v: propagation velocity m/μs; f: sampling frequency MHz)

◆Sampling frequency: 400MHz, 200MHz, 100MHz, 50MHz, 25MHz, 12.5MHz, 6.25MHz, 3.125MHz.

◆Power supply and power consumption: AC220V±10%, not more than 15W; DC12V (7AH) not more than 20W.

Standby time: can be used continuously for about 6 hours.

 

Panel Description

 

product-411-259

Tester panel schematic

1. Pulse method indicator: green diode, green light on after power on, the working state in the pulse method test state.

2. Flashover method indicator: red diode, when the working state is in the high pressure flash sampling state, the red light.

3. Multiple times method indicator: red diode, when the working state is in the state of multiple pulse sampling, the red light is on.

4. Charging socket: Please use the dedicated DC12V3A power adapter.

5. Output amplitude: Used to adjust the input and output pulse amplitudes. When in use, adjust according to the waveform displayed on the screen. If the adjustment is too small, the pulse reflection is very small, or even cannot be sampled, as shown in the figure below (left). If the adjustment is too large, the reflected pulse is connected to the baseline without intersection, and the baseline may even become a slash, as shown in the figure below (right). Generally, before sampling, the input amplitude knob is rotated about 1/3, and then adjusted according to the size of the sampled waveform and resampled.

product-1095-314

6. Output socket: The instrument uses a 9-hole aviation socket, which is the communication control port between the tester host and the trolley.

 

Products Description

101

 

102

103

104

03

04

05

06

07

08

09

 

Hot Tags: cable fault detector, China cable fault detector manufacturers, factory