Transformer Comprehensive Test Bench

HM5050 Transformer Comprehensive Test Bench Display Video

1.Main interface

Figure 1 Main Interface

1.Indicator"Phase Sequence Relay": Refer to the input power phase sequence of Console. If the phase sequence is correct, the indicator in green, if the phase sequence is wrong, the indicator in red.

2.Indicator"E-Stop": Refer to emergency stop. It's in red if pressed E-Stop button, and in green without press E-Stop .While in testing, if any accident, can press E-Stop button to quickly cut off the power supply.

3.Indicator"Key Switch": The indicator in green when open key switch, indicator in red when key switch is closed .

4.Indicator"Security Gate": The indicator in green when lab door closed , indicator in red when lab door open.

5."Power AB Voltage" " Power BC Voltage" Power AC Voltage " : Refer to input line voltage to console.

6."Power A phase Current""Power B Phase cu rent""Power C Phase Current" : Refer to input current to console.

Note: After the main circuit breaker is switched in, the startup interface is shown as figure 12. Can only start test when all four indicators in green. 

2.The Main interface of AC Power Frequency Withstand Test  

Figure 2

Main Interface for AC Power Frequency Withstand Voltage Test

 "Set": Click it to enter into Parameter Set interface 

 "Auto" :Click it to enter into Auto Test interface 

 "Manual", Click it to enter into Manual Test interface 

 "Data": Click it to enter into Test Data interface

 "Home": Click it to back to previous interface 

3.Set Parameter

Hot Tags: Transformer Comprehensive Test Bench, China Transformer Comprehensive Test Bench manufacturers, factory, electrical testing equipment, electrical maintenance tester