HV AC RESONANT TEST SYSTEM

HV AC RESONANT TEST SYSTEM

The HMCXZ-13200kVA/100kV is a high-power variable-frequency series resonance test system primarily used for AC withstand voltage testing of high-voltage electrical equipment such as 110kV and 220kV power cables, power transformers, GIS, circuit breakers, insulators, and high-voltage transformers.
Send Inquiry
Description
Technical Parameters

Product Introduction &  working Principle

 

The HMCXZ-13200kVA/100kV is a high-power variable-frequency series resonance test system primarily used for AC withstand voltage testing of high-voltage electrical equipment such as 110kV and 220kV power cables, power transformers, GIS, circuit breakers, insulators, and high-voltage transformers.

  • Utilizing the principle of LC series resonance, the system relies on the resonance between the inductance of the high-voltage reactor and the capacitance of the test specimen to generate the high voltage and high current required for testing within the circuit.
  • The test power supply compensates only for active power losses in the circuit; the required power supply is only 1/Q of the test capacity, significantly reducing the on-site power load.
  • The resonant circuit possesses inherent filtering capabilities, producing a high-quality sine wave to prevent accidental breakdown of the test specimen caused by harmonics.
  • When the test specimen experiences insulation breakdown or flashover, the circuit immediately detunes, causing the circuit current to drop abruptly to 1/Q of the normal value, thereby preventing large short-circuit currents from damaging the fault point. At the same time, the high voltage disappears rapidly, eliminating recovery overvoltage and comprehensively protecting the safety of the test specimen, equipment, and personnel.

2

 

Technical parameter of the whole test system 

 

  • Rated Capacity 13,200 kVA
  • Rated Voltage 100 kV
  • Input Power Single-phase 220 V or Three-phase 380 V, 50 Hz
  • Operating Frequency 30–300 Hz
  • Output Voltage Waveform Distortion <1.0%
  • Continuous Operating Time 30 minutes under rated conditions; 60 minutes during cable withstand voltage testing
  • Unit Quality Factor (Q) >50
  • Cable Full-Load Q-Factor >30 (load-dependent)
  • System Measurement Accuracy 1.0%

 

Products Details

 

01

02

03

 

04

 

Hot Tags: hv ac resonant test system, China hv ac resonant test system manufacturers, factory