3-Phase Transformer SFRA Test Equipment

3-Phase Transformer SFRA Test Equipment suppliers

3-Phase Transformer SFRA Test Equipment factory

3-Phase Transformer SFRA Test Equipment best

3-Phase Transformer SFRA Test Equipment high quality

3-Phase Transformer SFRA Test Equipment price

3-Phase Transformer SFRA Test Equipment

Name: China 3-Phase Transformer SFRA Test Equipment Manufacturers Factory - Goldhome Hipot
Brand: Goldhome
SKU: 300161564

Even if a winding does not fail immediately after undergoing localized deformation, it may still harbor serious potential for future failure. If a transformer with a deformed winding continues to operate, it may fail due to overvoltage or short-circuit surges, and in some cases, it may even burn out spontaneously during operation. Therefore, the HM5010 Transformer Winding Deformation Tester was developed by Goldhome to meet on-site needs, drawing on similar products from both domestic and international markets while incorporating the specific requirements of China’s power system. It features multi-channel waveform display and provides clear and concise test data.

Send Inquiry

Description

Technical Parameters

Products Video

HM5010 Winding Resistance Deformation Test Video

Product Overview

HM5010-2

The HM5010 Transformer Winding Deformation Tester is an instrument used to measure the winding deformation of a transformer. It mainly detects the amplitude frequency response characteristics of each winding of the transformer, and compares the detection results vertically or horizontally. Based on the degree of change in amplitude frequency response characteristics, it determines the possible winding deformation of the transformer.

Products Description

1. Features a built-in LCD screen, eliminating the need for an external laptop and making it easy to carry.

2. Runs on the Windows operating system, offering a more intuitive user interface and clear, at-a-glance data analysis.

3. Capable of continuously testing and displaying up to 9 curves.

4. Allows users to select any number of test curves and generate reports.

5. Offers strong resistance to interference and superior repeatability.

HM501003

product features

1. Using the advanced technical of DDS;
2. Using the high speed and advanced microprocessor to design;
3. Using double channels of AD chip of 16 bits;
4. With seven inch LCD touch screen of which the brightness can be adjusted;
5. With thermal printer of which the print thick can be adjusted;
6. It could store one hundred and twenty groups of data, which could be read to current screen or upload to the PC;
7. With PC software using which we could upload data ,test, analyze data, print data, or create word document;
8. Using USB2.0 to connect to the device.

HM5010-3

Product Parameter

HM5010-5

1. Two different sweep modes: Linear sweep,Section sweep
- Linear sweep:
0.5KHZ-1MHZ interval 0.5KHZ 2000 dots
- Section sweep:
50HZ-100HZ interval 2HZ 25 dots
100HZ-1KHZ interval 20HZ 45 dots
1KHZ -10KHZ interval 50HZ 180 dots
10KHZ-100KHZ interval 0.2KHZ 450 dots
100KHZ – 500KHZ interval 0.5KHZ 800 dots
500KHZ – 1000KHZ interval 1KHZ 500 dots
2. Test range: (-100dB) - (+20dB)
3. Test accuracy: 0.1dB
4. Frequency accuracy: <0.01%
5. Signal input impedance: >1M Ω
6. Signal output impedance: 50 Ω
7. Tester dimension: 31cm X 15cm X 15cm
8. Weight: 4.0KG

Hot Tags: 3-phase transformer sfra test equipment, China 3-phase transformer sfra test equipment manufacturers, factory

SFRA Transformer Winding Deformation Tester

Winding Resistance Deformation Tester